Unit details

See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.

Heavy-Duty Tandem Axle Commercial Enclosed Cargo Trailer – .080 Composite Semi-Screwless Skin w/ 7′ (84″) Interior Height, 5.2K Drop Axles & Beavertail

• GVWR: 9,990–10,400 lbs (Dual 5,200 lb Drop Spring Axles)

• Chassis Backbone: Heavy-Duty 2″ x 6″ Structural Steel Tube Main Rails

• Framing: 16″ On-Center Floor Crossmembers & Wall Uprights (1″ x 1-1/2″ Steel Tubing)

• Upgraded Interior Height: 7’0″ (84″) Stand-Up Ceiling Height

• Exterior Finish: .080 Composite Metal (Semi-Screwless Exterior)

• Approach & Loading: Integrated “No Show” Beavertail + 4 Floor-Mounted D-Rings

• Access Doors: Heavy-Duty Rear Ramp Door (or Barn Doors) + Oversized 36″ Side Entry Door

Engineered for commercial contractors, equipment haulers, race car teams, and high-capacity UTV transport needing severe-duty payload strength, walk-in stand-up headroom, and a reduced approach angle. Upgraded from standard light-duty rails to an unyielding 2″ x 6″ structural steel tube mainframe, this chassis eliminates frame sagging, twist, and corner racking under heavy concentrated point loads. Framing is reinforced throughout with 1″ x 1-1/2″ steel tubing in both the walls and ceiling on 16″ on-center floor and wall spacing, outperforming flimsy hat posts or Z-bars on rough roads.

The exterior is wrapped in heavy-gauge .080 composite metal hung semi-screwless, providing a mirror-flat, wave-resistant surface that resists thermal expansion, prevents highway skin flutter, and serves as an ideal canvas for full business graphics. Upgraded to a full 7’0″ (84″) interior ceiling height, tandem 5,200 lb EZ-Lube drop spring axles, an integrated No Show Beavertail, and four floor D-rings, this hauler is configured to roll in tall side-by-sides, lifted off-road toys, and heavy equipment with maximum overhead clearance and smooth drive-on transitions.

Key Specifications & Heavy-Duty Commercial Features

• Upgraded 7’0″ (84″) Stand-Up Interior Clearance: Full 7-foot vertical walk-in ceiling delivers upright duck-free comfort, expanded overhead racking capacity, and taller drive-through clearance for high-profile machines, lifted UTVs, and tall palletized equipment.

• Severe-Duty 2×6 Tube Backbone & Commercial Skeleton:

  • Mainframe: Massive 2″ x 6″ structural steel tube main rails built to support heavy industrial payloads and rolling machinery.

  • Floor Framing: 16″ on-center floor crossmembers supporting a commercial 3/4″ plywood floor painted and sealed underneath for undercarriage moisture and rot protection.

  • Wall & Roof Framing: 1″ x 1-1/2″ structural steel tubing on 16″ on-center wall members lined with premium 3/8″ plywood sidewalls, paired with 24″ on-center steel tube roof bows.

• Tandem 5.2K Drop Running Gear & Low Loading Profile:

  • Dual 5,200 lb spring axles equipped with a 4″ drop and EZ-Lube hubs for a lower center of gravity, reduced road sway, and smooth highway tracking.

  • 15″ commercial radial tires mounted on classic 6-lug Silver Mod steel wheels.

• “No Show” Beavertail & Cargo Securement:

  • Sloped No Show Beavertail built into the rear floor frame to transition the loading angle, allowing low-profile sports cars, mowers, and long-wheelbase machinery to load without scraping.

  • Four (4) factory-installed floor D-rings strategically placed to tie down equipment securely.

• Rigid .080 Composite Semi-Screwless Exterior:

  • Heavy-gauge .080 composite metal exterior panels installed semi-screwless for maximum dent resistance, heat stability, and a clean professional appearance.

  • Seamless Galvalume roof engineered to prevent joint leaks and eliminate standing water pooling.

• Aerodynamic V-Nose & Front Armor:

  • Forward V-nose wedge cuts highway drag, improves fuel efficiency, and adds front interior floor space.

  • Accented with vertical Aluminum Tread Plate (ATP) trim down the center point and a rugged 24″ front ATP stoneguard to deflect kicked-up gravel and debris.

• Doors, Access & Ventilation:

  • Rear Access: Your choice of a heavy-duty spring-assist rear ramp door for rolling vehicles or commercial double rear barn doors.

  • Side Access: Oversized 36″ side entry door offering wide walk-in convenience for operators wearing bulky gear or carrying toolboxes.

  • Ventilation: Your choice of a framed roof vent or side-wall flow vents for continuous interior air circulation.

• Hitch, Electrical & Exterior Lighting:

  • 2-5/16″ A-frame coupler paired with a 2,000 lb top-wind tongue jack.

  • Aluminum teardrop fenders with integrated clearance lights, high-visibility rear LED strip tail lights, a 12V interior dome light, and a standard 7-way RV-style round pigtail harness.

Built with continuous 2×6 steel tubing, 5.2K drop axles, a 7′ interior ceiling, and a low-approach No Show Beavertail—heavy-duty utility ready for daily work. Call today or visit our yard to inspect inventory, explore financing, or arrange delivery.

Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.