Trailers / 2027 Caliber 8.5’x25′ PF UFB 20k Gooseneck Deckover Trailer
Unit details
See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.
-
GVWR Rating: 20,000 lbs
-
Chassis & Neck Construction: Heavy-Duty 12″ Structural Steel I-Beam Main Frame & Integrated 12″ I-Beam Gooseneck
-
Deck Understructure: 3″ Structural C-Channel Crossmembers on 18″ Centers
-
Axles & Hubs: Dual 10,000 lb Heavy-Duty Electric Brake Axles w/ Commercial Oil Bath Hubs & Breakaway Safety Kit
-
Suspension: Heavy-Duty Multi-Leaf Slipper Spring Suspension
-
Landing Gear: Dual 12,000 lb (24K Total Static Capacity) Heavy-Duty Drop-Leg Jacks
-
Coupler & Safety Connections: Adjustable 2-5/16″ Round Gooseneck Coupler w/ Dual 3/8″ Grade 70 Heavy-Duty Safety Chains
-
Decking: 2″ Nominal Pressure-Treated Pine Wood Deck
-
Rear Staging & Ramps: Self-Cleaning Cleated Dovetail w/ Heavy-Duty Spring-Assist Stand-Up Ramps
-
Wheels & Tires: 235/80R16 10-Ply Commercial Radial Tires (Dual/Single configuration per axle spec)
-
Lighting & Wiring: Full DOT-Approved Sealed LED Exterior Lighting Package
-
Industrial Finish: 2-Stage High-Solid Polyurethane Protective Paint System
A severe-duty commercial gooseneck platform engineered for heavy equipment operators, hotshot haulers, agricultural operations, and earthmoving contractors transporting full-sized excavators, mid-size crawler tractors, telehandlers, and commercial machinery. Built on a continuous 12″ structural steel I-beam mainframe paired with an integrated 12″ I-beam gooseneck subframe, this chassis distributes hitch and payload forces directly into the truck bed, preventing beam sagging, frame fatigue, and chassis flex under maximum gross weight ratings.
The running gear features tandem 10,000 lb heavy-duty commercial axles equipped with continuous oil bath lubrication hubs, keeping wheel bearings cooler during long interstate hauls while simplifying visual oil-level inspections. Equipment transitions are smooth and secure thanks to the open self-cleaning steel cleated dovetail and heavy-duty spring-assist loading ramps, shedding heavy packed mud, snow, and gravel while providing positive steel traction for tracked equipment. Finished in a 2-stage high-solid urethane protective coating over treated lumber decking, this 20K hauler is built for continuous commercial duty.
Key Specifications & Commercial Features
-
Rigid 12″ Structural I-Beam Spine & Substructure:
-
Continuous 12″ structural steel I-beam main frame rails and matching 12″ gooseneck uprights provide torsional resistance and stable highway tracking.
-
3″ structural C-channel crossmembers spaced on 18″ centers provide close support across the entire deck width to prevent deck board deflection under heavy rubber tires and steel tracks.
-
Treated 2″ pressure-treated pine decking resists weather rot, surface splintering, and fungal decay in wet operating environments.
-
-
Tandem 10K Oil Bath Running Gear & 10-Ply Tires:
-
Dual 10,000 lb commercial axles with large-bore electric drum brakes on all four wheels.
-
Commercial oil bath hubs deliver continuous lubrication at highway speeds, lowering hub temperatures and eliminating routine bearing packing.
-
Multi-leaf slipper spring suspension absorbs high-impact gravel washboards and jobsite obstacles without hanger deformation.
-
235/80R16 10-ply commercial radial tires provide dependable load carrying capacity and puncture resistance.
-
-
Dual 12K Drop-Leg Landing Gear & Hitch Security:
-
Dual 12,000 lb side-wind drop-leg jacks provide 24,000 lbs of combined lift and static stabilization, allowing easy hookup and level parking on uneven jobsite dirt.
-
Adjustable 2-5/16″ gooseneck ball coupler matches varying commercial truck bed heights and aftermarket air-ride hitches.
-
Heavy-duty 3/8″ Grade 70 transport safety chains with latching hooks for DOT highway compliance.
-
-
Self-Cleaning Dovetail & Heavy-Duty Spring-Assist Ramps:
-
Angle-iron cleated self-cleaning dovetail allows mud, clay, and snow to fall cleanly through the frame, preventing debris buildup under tracks.
-
Heavy-duty spring-assisted ramps eliminate back strain during setup, lifting smoothly from the ground and pinning upright for transit.
-
-
2-Stage High-Solid Urethane Coating & DOT Electronics:
-
High-solids two-stage polyurethane paint process seals all welded joints, defending the steel frame against rust, gravel chipping, chemical washdowns, and UV degradation.
-
DOT-compliant sealed rubber-grommet LED marker and stop/turn/tail lights connected via a fully sealed wiring harness to resist road brine and water intrusion.
-
12″ I-beam frame and neck, dual 10K oil-bath axles, dual 12K drop-leg jacks, 2-stage urethane finish, and self-cleaning spring-assist dovetail—built for heavy-duty machinery transport. Call today or visit our yard to inspect inventory, explore commercial financing, or arrange jobsite delivery.
Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.
Trailer World
Gooseneck Equipment Trailer
Quick Specs
| Location: | Robertsdale, AL |
| Stock Number: | 85484 |
| Trailer Type: | Gooseneck Equipment Trailer |
| Color: | Black |
| Length x Width: | 25' 300" x 8.5' 102" |
| Axles: | 2 |
| GVWR: | 20000 lbs |
| Condition: | New |
Dimensions & Capacity
| Axles: | 2 |
| GVWR: | 20000 lbs |
| GAWR: | 10000 lbs |
| Length: | 25' 300" |
| Width: | 8.5' 102" |
Options
| Has Living Quarters?: | No |
Additional Information
| VIN: | 57BGG2529X1585484 |
| Stock Number: | 85484 |
| Year: | 2027 |
| Make: | Caliber |
| Model: | GH825 PF UFB |




