Unit details

See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.

Commercial Heavy-Duty Tilt Equipment Trailer (16,000 lb GVWR) – 8″ I-Beam Frame w/ 8K Torsion Axles, 16-Ply Tires & 8′ Stationary + 16′ Tilt Deck

• GVWR: 16,000 lbs

• Deck Configuration: 24′ Total Length (8′ Stationary Front Deck + 16′ Gravity Tilt Bed)

• Frame & Tongue: Continuous 8″ Structural I-Beam Mainframe w/ 8″ I-Beam Tongue

• Crossmembers: 3″ Structural Channel on 18″ Centers

• Axles & Suspension: Dual 8,000 lb Electric Brake Torsion Axles w/ Emergency Breakaway System

• Approach System: Low-Profile Steel Knife-Edge Rear Approach

• Landing Gear: 12,000 lb Heavy-Duty Drop-Leg Jack

• Running Gear: 215/80R17.5 16-Ply Super-Single Commercial Radial Tires on 8-Lug Wheels

• Decking: Kiln-Dried Pressure-Treated Wood Deck

• Finish: Industrial 2-Stage High-Solid Urethane Paint

A commercial-grade heavy equipment tilt trailer engineered for paving crews, heavy equipment rental outfits, excavation contractors, and utility companies moving mid-sized excavators, track loaders, asphalt rollers, and skid steers. Designed to eliminate heavy ramp handling, this hauler combines a 16-foot hydraulically dampened tilt deck with an ultra-low knife-edge rear approach, delivering an effortless, low-angle transition that lets low-clearance machinery drive straight aboard without hanging up or bottoming out.

Built on a massive 8-inch structural I-beam main frame and matching 8-inch I-beam tongue, this chassis delivers exceptional longitudinal rigidity, resisting deck deflection and frame twist under concentrated axle loads. Outfitted with dual 8,000 lb rubber torsion brake axles, 16-ply commercial-grade 17.5″ radial tires, a 4-foot stationary front deck for attachments and toolboxes, and diamond plate fenders with integrated steps, this 16,000 lb GVWR hauler is engineered for heavy daily transport.

Key Specifications & Commercial Features

• Continuous 8″ Structural I-Beam Backbone: Heavy 8″ I-beam main rails and continuous 8″ I-beam tongue provide maximum beam strength, preventing frame twist and hinge fatigue when loading heavy steel-track equipment.

• Dual 8K Commercial Torsion Axles: Upgraded tandem 8,000 lb axles equipped with electric brakes on all hubs and an independent rubber torsion suspension, delivering an ultra-smooth highway ride, reduced road vibration, and zero equalizer maintenance compared to leaf springs.

• 16-Ply Commercial 17.5″ Radial Tires: Rolling on 215/80R17.5 Load Range H (16-Ply) commercial tires mounted on heavy-duty 8-lug steel wheels, providing exceptional sidewall puncture resistance, low rolling resistance, and superior heat dissipation under continuous heavy payloads.

• 8′ Stationary Deck + 16′ Tilt Bed Configuration:

  • 8-Foot Stationary Front Deck: Solid front deck section engineered for securing attachments, hydraulic breakers, trenching buckets, or job boxes without interrupting the tilt function.

  • 16-Foot Gravity Tilt Section: Regulated by a hydraulic dampening cylinder for smooth, controlled loading and automatic deck lock-down as equipment weight transitions over the pivot axis.

• Knife-Edge Steel Approach: Low-profile tapered steel knife-edge rear transition plate provides a smooth, hang-up-free approach angle for pavers, rollers, and small-wheel scissor lifts.

• Treated Wood Deck on 18″ Centers: Premium pressure-treated wood decking provides natural traction and cushioning for steel tracks and rubber tires, supported underneath by 3″ structural channel crossmembers spaced 18″ on center.

• 12,000 lb Drop-Leg Landing Gear: Heavy-duty 12K front drop-leg tongue jack for fast coupling, effortless leveling, and rock-solid unhitched support on soft or uneven ground.

• Diamond Plate Armor & Access Steps: Reinforced diamond plate steel fenders featuring integrated welded access steps for safe, slip-free deck boarding and equipment tie-down checks.

• Safety & Hitch Rigging:

  • Adjustable 2-5/16″ coupler allows quick hitch height matching to various commercial tow vehicles.

  • High-tensile 3/8″ Grade 43 safety chains and emergency electric breakaway system with onboard battery.

  • Dedicated front-mounted spare tire mount.

  • Sealed DOT-approved LED lighting package for complete visibility and compliance.

  • Industrial 2-stage high-solid urethane finish over a chemically prepped substrate to protect against road salt, stone chipping, and weather exposure.

Continuous 8″ I-beam construction, independent 8K torsion ride, 16-ply commercial running gear, and effortless knife-edge tilt loading—engineered for heavy equipment operations. Call today or visit our yard to inspect inventory, explore commercial financing, or arrange delivery.

Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.