Unit details

See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.

Commercial Heavy-Duty Gravity Tilt Equipment Trailer (14,000 lb GVWR) – 6×2 Tubing Frame w/ 7K Drop Axles, Hydraulic Dampening & 2′ Knife-Edge Approach

• GVWR: 14,000 lbs

• Deck Configuration: 16′ Gravity Tilt Section + Stationary Front Deck

• Frame & Tongue: 6″ x 2″ Fully Boxed Structural Steel Tubing Frame w/ 6″ Structural Channel Tongue

• Crossmembers: 3″ Structural Channel on 18″ Centers

• Axles & Suspension: Dual 7,000 lb EZ-Lube Electric Brake Drop Axles w/ Multi-Leaf Slipper Springs

• Approach System: 2′ Low-Profile Steel Knife-Edge Approach (No Ramps Needed)

• Landing Gear: 12,000 lb Heavy-Duty Drop-Leg Jack

• Running Gear: ST235/80R16 10-Ply Commercial Tires on 8-Lug Wheels

• Decking: Kiln-Dried Pressure-Treated Wood Deck

• Finish: Industrial 2-Stage High-Solid Urethane Paint

A severe-duty commercial equipment tilt bed engineered for paving outfits, equipment rental operations, excavation contractors, and equipment operators hauling scissor lifts, rollers, compact track loaders, and skid steers. Designed to eliminate the back strain, injury hazards, and setup time of heavy manual ramps, this gravity tilt hauler utilizes a hydraulically cushioned tilt deck paired with a 2-foot steel knife-edge approach, delivering an ultra-low, seamless transition angle that lets low-clearance machinery drive straight onto the deck.

Built on an ultra-rigid 6″ x 2″ structural steel tube main frame and pulled by a 6″ channel tongue, this chassis provides exceptional torsional strength that resists deck twist and hinge bind during single-point equipment drive-on. Outfitted with tandem 7,000 lb EZ-Lube electric brake drop axles on multi-leaf slipper springs, a 12K drop-leg jack, diamond plate fenders with integrated steps, and a 2-stage high-solid urethane finish, this 14K tilt trailer delivers safe, single-operator loading efficiency.

Key Specifications & Commercial Features

• Rigid 6″ x 2″ Structural Tube Mainframe: Fully boxed 6×2 rectangular tube perimeter delivers exceptional beam strength, preventing frame deflection, hinge misalignment, and deck sag under concentrated heavy equipment loading.

• 16′ Gravity Tilt Bed w/ Hydraulic Cushion Cylinder: Smooth gravity-tilt mechanism regulated by an adjustable hydraulic dampening cylinder, allowing a single operator to release the deck latch, drive equipment up smoothly, and lock the bed flat automatically as equipment weight shifts forward.

• Stationary Front Deck: Solid front deck section ideal for hauling attachments, pallets of materials, job boxes, or trenching implements without interfering with the tilt bed cycle.

• 2′ Low-Profile Steel Knife-Edge Approach: Cleated 2-foot steel tapered tail plate eliminates ramp overhang, providing a continuous, hang-up-free approach angle for low-ground-clearance rollers, asphalt equipment, and narrow-wheel scissor lifts.

• Tandem 7K EZ-Lube Drop Axles w/ Slipper Springs: Dual 7,000 lb electric brake axles engineered with drop spindles for a lower center of gravity and stable loading angles, supported by a heavy-duty multi-leaf slipper spring suspension built to endure off-road jobsite impacts.

• Commercial 8-Lug Running Gear: Rolling on ST235/80R16 Load Range E (10-Ply) commercial radial tires mounted on heavy-duty 8-lug steel wheels for high highway heat dissipation and reliable payload capacity.

• 12,000 lb Drop-Leg Landing Gear: Commercial 12K front drop-leg jack provides rapid deployment, rock-solid uncoupling, and stable unhitched support even when fully loaded.

• Heavy-Duty Treated Deck & 18″ O.C. Subframe: Continuous pressure-treated wood deck cushioned against machinery tracks and protected underneath by 3″ structural channel crossmembers spaced 18″ on center.

• Diamond Plate Armor & Access Steps: Heavy-gauge diamond plate steel fenders equipped with integrated front/rear welded steps for safe, slip-free deck boarding and load inspection.

• Commercial Safety & Coupler Package:

  • Heavy-duty adjustable 2-5/16″ coupler to easily adapt hitch height to any commercial tow vehicle.

  • Dedicated front exterior spare tire mount.

  • Emergency electric battery breakaway kit, 3/8″ Grade 43 safety chains, and full DOT-approved exterior LED lighting.

  • Protected by a high-durability 2-stage high-solid urethane industrial finish.

Structural 6×2 boxed tubing, low-angle 2′ knife-edge transition, gravity hydraulic dampening, and dual 7K drop running gear—built for fast, zero-effort equipment loading. Call today or visit our yard to inspect inventory, explore commercial financing, or arrange delivery.

Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.