Unit details

See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.

Commercial 14,000 lb GVWR Heavy-Duty Tilt Equipment Trailer – 8″ I-Beam Frame, Dual 3″ x 16″ Hydraulic Cylinders, 4″x4″x1/4″ Tubing Deck Frame & Front Winch Plate

• Chassis & Frame: Heavy-Duty 8″ Structural Steel I-Beam Main Frame (000)

• Tilt Deck Structure: 4″ x 4″ x 1/4″ Heavy-Wall Structural Steel Tubing Deck Frame (000)

• Under-Deck Crossmembers: 3″ Structural C-Channel (3.5 lb/ft) on 16″ On-Center Spacing (000)

• Hydraulic Tilt System: Dual 3″ x 16″ Hydraulic Lift Cylinders w/ Front Tongue-Mount Pump Box (000)

• Axles & Braking System: Tandem 7,000 lb Straight Commercial Axles w/ Electric Brakes on Both Axles (ES2)

• Wheels & Tires: ST235/80R16 Load Range E (10-Ply) Commercial Radial Tires (000)

• Decking & Cargo Security: Treated Pine Wood Decking w/ (4) Standard 3″ x 5/8″ Heavy-Duty Weld-On D-Rings (000)

• Recovery Upgrade: Integrated Heavy-Duty Front Winch Plate (U50)

• Hitch & Landing Gear: 14,000 lb Adjustable 2-5/16″ Bumper-Pull Coupler & 10,000 lb (10K) Spring-Loaded Drop-Leg Jack (000)

• Utility & Access: Standard Dual Front Boarding Steps, Frame-Mounted Spare Tire Carrier & Standard Commercial Wire Harness (000)

A heavy-duty commercial tilt equipment hauler engineered for excavation contractors, agricultural operations, equipment rental fleets, and hotshot haulers transporting skid steers, compact track loaders, mini-excavators, and non-running machinery. Built on a rigid 8″ structural steel I-beam main frame paired with a 4″ x 4″ x 1/4″ thick-wall structural tubing tilt deck frame, this chassis resists torsional twist and beam sag when loading off-center machinery or traversing uneven off-road job sites.

Powered tilt operation is driven by dual 3″ x 16″ hydraulic cylinders fed from a secure front tongue-mount pump box, delivering smooth, balanced deck lifting and lowering under full payload without frame binding. Outfitted with an upgraded front winch mount plate (U50), tandem 7,000 lb straight axles with four-wheel electric brakes, 10-ply Load Range E 16″ radial tires, and four heavy-duty 3″ x 5/8″ weld-on D-rings, this 14K tilt platform eliminates cumbersome steel ramps and streamlines daily machinery transport.

Key Specifications & Commercial Features

• 8″ I-Beam Spine & 4″x4″x1/4″ Tubing Tilt Deck:

  • Continuous 8″ structural steel I-beam main frame handles high tongue weights and dynamic highway braking forces without flexing.

  • 4″ x 4″ x 1/4″ heavy-wall structural tubing tilt deck perimeter provides exceptional rigidity across the tilt hinge and tail transition.

  • 3″ structural C-channel crossmembers (3.5 lb/ft) spaced on tight 16″ centers support heavy point loads from rubber tracks, solid skid-steer tires, and forklift wheels.

  • Pressure-treated wood decking provides natural grip in wet or muddy conditions while resisting rot and weather deterioration.

• Dual 3″ x 16″ Hydraulic Cylinder Tilt System:

  • Twin 3″ bore x 16″ stroke hydraulic cylinders provide synchronized, dual-sided lifting force that prevents deck racking when loading uneven or top-heavy machinery.

  • Self-contained hydraulic power unit housed inside a protective front tongue-mount steel pump box for easy maintenance and weather defense.

• Tandem 7K Straight Axles & 10-Ply Commercial Rubber:

  • Dual 7,000 lb straight axles equipped with electric drum brakes on all four wheels (ES2) for confident stopping power under full 14,000 lb gross loads.

  • ST235/80R16 Load Range E (10-ply) commercial radial tires built for heat dissipation, sidewall durability, and high-mileage highway reliability.

• Upgraded Winch Plate (U50) & Heavy-Duty Tie-Downs:

  • Factory-installed heavy-duty front winch plate (U50) ready to accept an electric recovery winch for loading dead vehicles, disabled tractors, or non-rolling equipment up the tilted deck.

  • Four (4) massive 3″ x 5/8″ forged steel weld-on D-rings anchored directly to the frame for heavy-grade transport chains and ratchet binders.

• Hitching, Landing Gear & Operator Access:

  • 14,000 lb rated adjustable 2-5/16″ bumper-pull coupler allows precise height leveling across different tow trucks.

  • 10,000 lb (10K) spring-loaded drop-leg tongue jack deploys rapidly and supports heavy tongue loads without bending.

  • Dual standard front deck steps, integrated spare tire mount, and a commercial standard wiring harness complete the work-ready package.

8″ I-beam backbone, 4″x4″x1/4″ tubing tilt deck, dual 3″ x 16″ hydraulic cylinders, twin 7K electric brake axles, and front winch plate—engineered tough for rapid, ramp-free machinery transport. Call today or visit our yard to inspect inventory, explore commercial financing, or arrange jobsite delivery.

Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.