Unit details

See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.

Commercial 72″ x 12′ Tandem Axle Dump Trailer (9,990 lb GVWR) – Gray w/ 2″x6″ Structural Tube Frame, Scissor Hoist & Slide-In Ramps

• Configuration Code: DCB7212052ES2GRY

• Dimensions: 72″ Wide x 12′ Long Dump Bed

• GVWR: 9,990 lbs

• Empty Weight / Payload: Empty Weight: 2,500 lbs | Payload Capacity: ~7,490 lbs

• Chassis & Backbone: 2″ x 6″ x 3/16″ Structural Steel Tube Frame

• Hoist System: Heavy-Duty TH-516 Scissor Hoist

• Axles & Running Gear: Dual 5,200 lb Axles (Both Electric Brakes) on ST225/75R15 LRD 8-Ply Tires

• Hitch Configuration: Bumper Pull w/ Adjustable 14,000 lb 2-5/16″ Coupler

• Dump Body: 20″ Tall 12-Gauge Formed Steel Sidewalls

• Tailgate System: Double Rear Swing-Out Doors

• Equipment Loading: 12″ x 80″ Slide-In Heavy-Duty Loading Ramps

• Finish: Industrial Gray

A versatile, high-payload tandem-axle bumper pull dump trailer engineered for landscape contractors, roofing crews, residential remodelers, and property managers needing equipment-hauling capability and high-leverage dumping power in an agile footprint. Built on an ultra-rigid 2″ x 6″ x 3/16″ structural steel tube frame, this chassis offers torsional strength that resists twist, bending, and deflection under uneven loads or off-camber jobsite discharges.

The dump body features continuous 20-inch 12-gauge solid steel sidewalls powered by a commercial-grade TH-516 hydraulic scissor hoist, delivering smooth, balanced lift geometry and stable tipping leverage across the entire 12-foot bed. Supported by dual 5,200 lb axles with electric brakes on both hubs and outfitted with 12″ x 80″ slide-in rear ramps, four welded floor D-rings, and a front-mount tarp system, this 9,990 lb GVWR hauler is fully prepped to haul compact tractors, skid steers, mulch, and demolition debris.

Key Specifications & Commercial Features

• Rigid 2″ x 6″ x 3/16″ Structural Tube Frame: Fully boxed rectangular structural tube mainframe delivers high rigidity, eliminating the frame twist and bed binding common with standard channel frames.

• Commercial TH-516 Scissor Hoist: Heavy-duty scissor lift mechanism provides balanced lifting force across the center of the bed, ensuring fast cycle times, stable dumping angles, and reduced stress on the hydraulic pump.

• Tandem 5.2K Electric Brake Axles: Dual 5,200 lb axles equipped with commercial electric brakes on all four hubs, delivering balanced braking authority, safety on steep grades, and highway tracking.

• High-Yield Payload Capacity: Ultra-efficient 2,500 lb empty tare weight leaves nearly 7,500 lbs of usable payload within a non-CDL-friendly 9,990 lb GVWR class.

• Equipment Loading & Securement:

  • 12″ x 80″ slide-in ramps stowed cleanly in dedicated under-bed rear frame pockets for drive-on loading of mini-skid steers, mowers, or UTVs.

  • Four (4) 3″ x 5/8″ weld-on heavy-duty D-rings mounted inside the tub for positive equipment tie-down.

• Double Rear Swing-Out Doors: Full-opening rear swing barn doors latch flat against the exterior sides, providing unobstructed clearance for gravity discharge or equipment drive-in.

• Commercial Running Gear & Armor:

  • High-capacity ST225/75R15 Load Range D (8-Ply) radial tires for highway heat dissipation and durability.

  • Heavy-duty diamond plate steel fenders built to deflect thrown rocks and resist jobsite impacts.

  • Integrated weld-on spare tire mount ready for quick roadside tire changes.

• Jobsite Hardware & Rigging:

  • Front 14,000 lb adjustable 2-5/16″ cast coupler to easily match varying tow vehicle hitch heights.

  • 7,000 lb spring-loaded drop-leg tongue jack for fast, minimal-effort coupling and uncoupling.

  • Integrated front-mount tarp kit for containment of loose roofing, gravel, or organic debris.

• Commercial Electrical & Lighting:

  • Sealed DOT-approved LED lighting package featuring recessed 6″ oval and 3/4″ marker lights in vibration-dampening rubber grommets.

  • Fully enclosed, protected standard wiring harness designed to resist salt, moisture, and road snagging.

  • Durable Industrial Gray coating.

Structural 2×6 tube framing, TH-516 scissor hoist leverage, dual 5.2K braking axles, and slide-in equipment ramps—engineered tough for everyday commercial service. Call today or stop by the lot to inspect inventory, explore commercial financing, or arrange delivery.

Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.