Unit details

See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.

PRICE IS FOR SINGLE BIN

HDZ Heavy-Duty Roll-Off Dumpster Bin (4′ High Sides) – 10-Gauge Solid Steel Construction w/ Greasable Rollers & Rear Swing Door

• Model Series: HDZ Heavy-Duty Roll-Off Container / Dumpster Bin

• Side Wall Configuration: 4′ High, 10-Gauge Reinforced Steel Walls

• Floor Construction: Solid 10-Gauge Steel Bed Plate

• Underbody Support: 3″ Structural Channel (3.50 lbs/ft) on 16″ Spacing

• Main Perimeter Frame: 1-1/2″ x 3″ x 11-Gauge Structural Tubing Bed Frame

• Top Rail Reinforcement: Massive 3″ x 4″ x 11-Gauge Structural Tubing

• Dimensions: 60″ Bottom Rail Bed Width / 83″ Flared Top Rail Width

• Tailgate System: Single Heavy-Duty Rear Swing Door

• Load Securement: 4 Welded Interior D-Rings

• Tarp Option: No Tarp

A commercial-grade, heavy-duty roll-off replacement container engineered for waste management fleets, roofing crews, demolition contractors, and equipment operators. Fabricated specifically for high-frequency bin-swaps and severe jobsite abuse, the HDZ roll-off bin utilizes a solid 10-gauge steel bed floor supported by continuous 3″ structural channel crossmembers (3.50 lbs/ft) spaced 16″ on center, eliminating deck distortion, puncture hazards, and bottom sag under dense aggregate, scrap metal, or concrete rubble.

The container perimeter features 4-foot tall, 10-gauge reinforced steel side walls topped with a rigid 3″ x 4″ x 11-gauge rectangular tubing top rail to absorb repetitive loader bucket impacts and grapple strikes. Outfitted with heavy-duty greasable front and rear ground rollers, an integrated front heavy-duty winch attachment D-ring, and a single reinforced rear swing door, this bin delivers smooth roll-on/roll-off transitions and rapid cleanout cycles.

Key Specifications & Commercial Features

• Severe-Duty 10-Gauge Bed & Sidewalls: Complete tub fabricated from high-tensile 10-gauge solid sheet steel across the floor and 4-foot sidewalls, delivering high abrasion resistance against construction debris, masonry, and scrap.

• 16″ On-Center Structural Underbody: Supported beneath by 3″ structural channel crossmembers (3.50 lbs/ft) on 16″ centers, providing rigid structural backing capable of supporting concentrated heavy point loads.

• Reinforced Perimeter Tubing Rails:

  • Main bottom bed frame built from 1-1/2″ x 3″ x 11-gauge structural tubing for reliable rail-tracking.

  • Upper rim protected by 3″ x 4″ x 11-gauge structural tubing top rails to resist deformation from heavy machinery loading.

• Engineered Container Geometry: Features a 60″ bottom rail bed width engineered for standard roll-off trailer tracks, flaring out to an 83″ top rail width to maximize cubic yardage capacity and facilitate clean, jam-free gravity dumping.

• Greasable Rollers & Heavy-Duty Winch Point:

  • Front and rear heavy-duty rollers equipped with grease zerk fittings for smooth, low-friction rolling across asphalt, concrete, and rail tracks.

  • Front bulkhead equipped with a heavy-duty pulling D-ring engineered for high-tonnage winch cable or synthetic rope hookups.

• Single Heavy-Duty Rear Swing Door: Full-width rear gate swings completely clear of the dump path, locked by heavy-duty commercial latch hardware to prevent accidental discharge in transit.

• Welded Interior Tie-Downs: Outfitted with four (4) heavy-duty D-rings welded inside the box, allowing crews to safely anchor compact equipment, mini-skid steers, or materials when not hauling bulk refuse.

• Clean Configuration: Ordered without a tarp kit (No Tarp), ideal for operators integrating fleet-standard roll tarps, transfer station net systems, or dedicated trailer-mounted electric tarp kits.

All-steel 10-gauge tub construction, greasable ground rollers, reinforced 3×4 tubing rails, and 16″ O.C. underbody framing—built tough for relentless commercial bin rotations. Call today or visit the yard to inspect inventory, explore volume pricing, or arrange delivery.

Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.