Unit details

See us for a complete list of features and available options for this stock number! Description below may contain factory standard features and specifications which are not available and are subject to change.

Commercial Heavy-Duty I-Beam Dump Trailer – 8″ I-Beam Frame w/ 7-Ton Telescopic Cylinder & 10-Gauge Steel Construction

• Chassis & Tongue: Continuous 8″ Structural I-Beam Mainframe

• Box Construction: 10-Gauge Formed Steel Sidewalls & 10-Gauge Solid Steel Floor

• Wall Framing: 2″ x 4″ Structural Tubing Wall Rails

• Floor Framing: 3″ x 1/4″ C-Channel Structural Crossmembers (16″ O.C.)

• Hoist System: 7-Ton, 3-Stage Telescopic Hydraulic Jack (108″ Stroke)

• Tailgate System: Double Heavy-Duty Barn Doors

• Running Gear & Braking: Dual Electric Brake Axles w/ ST235/80R16 12-Ply Radial Tires

• Landing Gear & Stability: 12,000 lb Drop-Leg Tongue Jack & 5,000 lb Rear Support Jacks

A severe-duty commercial dump trailer engineered for general excavation, roofing tear-offs, scrap recovery, and machinery transport. Built on a rigid 8-inch structural I-beam mainframe, this chassis eliminates the torsional flex, center sagging, and frame twist typical of lighter-gauge channel frames under heavy point-loads and uneven discharges.

The dump tub is fabricated from high-tensile 10-gauge solid steel on both the floor and sidewalls, framed with rigid 2″ x 4″ tubing top rails and reinforced beneath by heavy 3″ x 1/4″ C-channel crossmembers on 16″ centers to resist dishing under dropped rock or mini-excavator tracks. Tipped by a massive 7-ton, 3-stage front-mounted telescopic cylinder delivering 108″ of stroke, this platform achieves steep dump angles for rapid, clean material discharge. Fully outfitted with rear slide-out ramps, dual rear stabilizer jacks, an integrated tarp system, and dual electric brakes, this hauler arrives jobsite-ready.

Key Specifications & Commercial Features

• Massive 8″ Structural I-Beam Chassis: Continuous 8″ I-beam framework engineered for high structural rigidity, eliminating frame deflection and providing superior highway tracking under full load capacity.

• Heavy-Duty 10-Gauge Floor & Sidewalls: Built with continuous 10-gauge solid steel plating on both the floor and sides to withstand repetitive contact with aggregate, masonry rubble, and heavy jobsite debris.

• Rigid 2″ x 4″ Tubing Wall Rails: Structural 2×4 steel tubing spans the top wall perimeter to protect sidewalls against impact from loader buckets, skid steers, and excavator arms.

• Heavy-Duty 16″ O.C. Underbody Framing: Floor plate supported by structural 3″ x 1/4″ C-channel crossmembers spaced 16″ on center, eliminating floor waviness and reinforcing the deck for tracked equipment transport.

• 7-Ton 3-Stage Telescopic Cylinder (108″ Stroke): Front-mount multi-stage hydraulic telescopic hoist delivers efficient tipping leverage, high-angle cleanout for sticky clay or asphalt, and lower electrical system strain.

• Double Rear Barn Doors: Heavy-duty swing-away barn doors equipped with commercial locking hardware, providing wide, unobstructed rear access for dumping bulky material or driving in machinery.

• Slide-Out Equipment Loading Ramps: Heavy-duty steel loading ramps stored in rear under-bed carrier pockets, engineered for fast deployment when loading skid steers, tractors, or trenchers.

• Dual Rear Support Jacks (5K): Integrated pair of 5,000 lb rear stabilizer jacks that pin down to level and support the trailer frame during equipment loading, preventing tongue lift.

• 12,000 lb Heavy-Duty Drop-Leg Jack: Commercial-grade 12K front drop-leg jack provides rapid uncoupling and solid front-end stabilization on rough or uneven jobsites.

• Dual Electric Brake Running Gear: Tandem axles equipped with dual electric brakes on both hubs, rolling on high-capacity ST235/80R16 12-ply radial tires mounted on commercial steel wheels.

• Onboard Power & Monitoring: Steel tongue-mounted toolbox houses the hydraulic pump unit alongside a dedicated battery and an integrated battery condition tester for instant voltage diagnostics.

• Commercial Safety & Convenience Package:

  • Complete integrated crank-style tarp kit with retention hardware.

  • Formed steel fenders with integrated welded steps (on 4′ wall builds) for safe side-climbing inspection.

  • Exterior boarding ladder included on 4-foot sidewall models.

  • Welded spare tire mount positioned on the front exterior bulkhead.

  • Heavy-duty adjustable coupler to adapt hitch height for various commercial tow rigs.

  • Full DOT-approved exterior lighting, heavy-duty safety chains, and high-visibility DOT reflective safety tape.

Heavy 8″ structural I-beam backbone, 10-gauge tub construction, and 7-ton telescopic hoist performance—built for severe commercial service. Call today or stop by the lot to inspect inventory, explore financing, or arrange delivery.

Contact us for a complete list of features and available options for this stock number! Description may contain factory features and specifications which are not available and are subject to change.